Product Detail

PEEK Reinforced Fiber Optics Cable

PEEK coating process to stabilize PEEK during extreme temperature fluctuations. This stabilization allows the optical fiber cable to retain PEEK’s strain transfer and optical properties while being free of compression-induced attenuation normally seen during temperature changes. CIT PEEK reinforced optical fiber cable is ruggedized to protect against abrasion and physical trauma to reduce failures and extend the life of the fiber.
Temperature sensors Fiber Optics
Acoustic sensors Fiber Optics
Strain sensors Fiber Optics
Pressure sensors Fiber Optics
Embedded sensors Fiber Optics

Radiation resistant fibers cable

CITCABLE:Radiation resistant fibers cable
Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:      -196°C to +260°C     

Manufactured from polymers such as PEEK, PTFE, PFA, ETFE, PVDF, and FEP, these products deliver innovative fiber optic solutions for a range of industries and applications:

• Aerospace

• Telecoms

• Medical

• Automotive

• Energy

• Nuclear

High Radiation Absorbed dose rate Optical Fibre Cable

   CITCABLE:  High Radiation Absorbed dose rate Optical Fibre Cable
  Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:  -196°C to +260°C  and short time 300°C     
 Applications

• Aerospace
• Atomic energy
• Medical
• Oil/gas
• Scientific research

• Low dispersion and low attenuation
• Superior mechanical protection and excellent stripping performance
• Outstanding uniformity and geometry control
• Low radiation loss

Ultra-thin PEEK Optical Fibre cable

CITCABLE:  Ultra-thin PEEK Optical Fibre cable
Temperature Range:   -196°C to +260°C, short 300°C
   it's meeting the special application requirements of the optical fibre in the radiation environment, the multi-mode fibre with radiation resistance is developed by adjusting the optical fibre components and improving the process technology. This fibre has graded refractive index profile, which fully optimizes the waveguide characteristics of 850nm & 1300nm operating wavelength, and has very low attenuation and high bandwidth. CITCABLE radiation resistant multi-mode fibres have 50μm core, Besides, CITCABLE also can make customized tight-buffered radiation resistant multi-mode fibre

• Customer colors are available through minimum order.
• Customized: CITCABLE can provide different tight buffered materials, such as ETFE, PFA, PEEK, TPI

200000Gy Radiation Resistant Single-mode Fibre cable

CITCABLE: 200000Gy Radiation Resistant Single-mode Fibre
  Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:  -196°C to +260°C  and short time 300°C     
 Applications

• Aerospace
• Atomic energy
• Medical
• Oil/gas
• Scientific research

• Low dispersion and low attenuation
• Superior mechanical protection and excellent stripping performance
• Outstanding uniformity and geometry control
• Low radiation loss

ETFE Tubing Fibre Cable

 CITCABLE: ETFE Tubing Fibre Cable 
  CITCABLE 0.9MM ETFE tubing can be employed as buffering material and provide additional protection for use with 250μm fibre.
Made from ETFE possessing, ETFE tubing has some excellent property of the material, such as resistance to heat and flame, and high specific dielectric strength, and gives optimal protection to 250μm fibre.
Applications

• Protect bare fibre in any situation against mechanical damage during handling and installation
• Provide an effective resistance to water vapor, oils/fuels, acids/alkalis, and solvents, which could adversely affect the fibre's signal transmission capabilities
• Excellent wear properties in many applications, and in cases of high voltage, radiant, medical equipments
• Can be easily installed over fibre up to more than 5 meters

• Highest flame retardant grade of UL94 V-0
• Flexibility at low temperature
• Retention of properties after aging at elevated temperatures up to 180℃

Radiation Resistant Multi-mode Optical Fibre cable

CITCABLE: Radiation Resistant Multi-mode Fibre cable
Temperature Range:   -196°C to +260°C, short 300°C
   it's meeting the special application requirements of the optical fibre in the radiation environment, the multi-mode fibre with radiation resistance is developed by adjusting the optical fibre components and improving the process technology. This fibre has graded refractive index profile, which fully optimizes the waveguide characteristics of 850nm & 1300nm operating wavelength, and has very low attenuation and high bandwidth. CITCABLE radiation resistant multi-mode fibres have 50μm core, Besides, CITCABLE also can make customized tight-buffered radiation resistant multi-mode fibre

• Customer colors are available through minimum order.
• Customized: CITCABLE can provide different tight buffered materials, such as ETFE, PFA, PEEK, TPI

PEEK Reinforced Optical Fiber cable

 CITCABLE: PEEK Reinforced Optical Fiber cable/Single-Mode Polyimide and PEEK
Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range: -65°C to +200°C Fluoropolymer
                                  -196°C to +260°C  TPI/PEEK
Jacket: Fluoropolymer/PEEK/TPI

Manufactured from polymers such as PEEK, PTFE, PFA, ETFE, PVDF, and FEP, these products deliver innovative fiber optic solutions for a range of industries and applications:

• Aerospace

• Telecoms

• Medical

• Automotive

• Energy

• Nuclear