Ribbon Teflon Wire Cable

CITCABLE:Ribbon Teflon Wire Cable
 Ultra Flat TEFLON Cable
Teflon Shielded Flat Cable
Flexible PTFE Flat Cable
Flat Ribbon FEP Cable
Rainbow TEFLON Cable
Ultra Flat PTFE Cable
FEP Flat Cable
Twisted Foam FEP Flat Coax Cable

TEFLON offers outstanding resistance to chemicals, oils and lubricants, retains it’s flexibility at low temperatures and has good weatherability.
Key Characteristics » Operating temperature: -100°C to 260°C
250V to 10000V Rating
Available with Nickel ,Silver-Plated or Tin-Plated Conductor
Superior dielectrical properties
Nonflammable

Military Specification Styles A range of  PTFE Insulated wires, designed, manufactured and fully released to meet the requirements of MIL-W-16878 (NEMA HP4)>

FLAT PEEK Wire Cable

CITCABLE: FLAT PEEK Wire Cable  
Application:
 New energy vehicle drive motor (EV-800V motor)
 PEEK FLAT Magnet wire Electric motors 
 Motor Rewind with peek insulation wire   
 PEEK wire sized 30AWG 
 PEEK lead wire 
 peek insulation wire for Motor >

350 degrees Magnet Wire

CITCABLE:   350 °C Magnet Wire  
   KEY PROPERTIES

Abrasion Resistance –  Poly (arylene ether) copolymer  imparts superior abrasion resistance to the wire it is covering. Both Poly (arylene ether) copolymer   insulated wire and PESK wire Poly (arylene ether) copolymer  can endure rugged environments allowing the covered wire to remain protected and to continue to function at a high level.

Chemical Resistance – Poly (arylene ether) copolymer  polymer is well-characterized for its broad chemical resistance spectrum protecting your wiring from corrosion and extending its work life.

Dielectric Strength – With its excellent dielectric strength, Poly (arylene ether) copolymer wire minimizes the motor’s susceptibility to outside electrical interference.>

Viton Parallel Sensor wire

CITCABLE: 22AWG 2F Fluoroelastomer Viton Parallel Sensor wire 
                    Fluoroelastomer PARALLEL CABLE for NTC SENSOR
                    Fluoroelastomer FLAT CABLE FOR for NTC SENSOR
                    Fluoroelastomer RIBBON CABLE FOR for NTC SENSOR
Products Description
·Rated temperature: :-40℃ ~ 200℃   
·Rated voltage: 60V DC—600V DC
·Conductor: 0.05mm2 To 25.0mm2 >

S316L plated Silver heating wire

 CITCABLE: S316L plated Silver heating wire

Products Description

·Rated temperature: :-196℃ ~ 300℃   

·Rated voltage: 60V DC—600V DC

·Conductor: 0.05mm2 To 10.0mm2 

1,Excellent mechanical properties and chemical resistance.

2,Outstanding and Excellent resistance at high temperature to engine fluids

3,High tear and tensile strength damping characteristic.

4, Hot Oil Resistant Thin-Wall 150 ℃ , 200℃  

5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket

6, High Temperature, High Performance

>

Tungsten Heating Wire

CITCABLE:Tungsten Heating Wire
 

Products Description

·Rated temperature: :-196℃ ~ 300℃   

·Rated voltage: 60V DC—600V DC

·Conductor: 0.05mm2 To 10.0mm2 

1,Excellent mechanical properties and chemical resistance.

2,Outstanding and Excellent resistance at high temperature to engine fluids

3,High tear and tensile strength damping characteristic.

4, Hot Oil Resistant Thin-Wall 150 ℃ , 200℃  

5, High performance PEEK,TPI,PEI,PTFE, Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket

6, High Temperature, High Performance 

 

>

Poly (arylene ether) copolymer insulated enameled wire

CITCABLE:  Poly (arylene ether) copolymer insulated enameled wire

KEY PROPERTIES

Poly (arylene ether) copolymer insulated enameled wire  
Among them:  Poly (arylene ether) copolymer (B), with an application temperature range of 250-300 degrees Celsius, can reach 450 degrees Celsius in a short time (2 hours).
Poly (arylene ether) copolymer (B) are suitable for both military and civilian use due to their excellent cost-effectiveness.
Poly (arylene ether) copolymer (B) are suitable for military use due to their highest performance and high price.
Poly (arylene ether) copolymer (A) can be applied within a temperature range of 300-350 degrees Celsius and can reach up to 450 degrees Celsius in a short period of time (8 hours).

Conductor diameter range: 0.10-10.02 mm (selected according to the wire gauge table)
Conductor materials: pure copper, silver plated copper, pure silver, and others
 >

350 degrees Magnet Wire

CITCABLE: 350 degrees Magnet Wire for Motor  
KEY PROPERTIES

Poly (arylene ether) copolymer insulated enameled wire  
Among them: Poly (arylene ether) copolymer (B), with an application temperature range of 250-300 degrees Celsius, can reach 450 degrees Celsius in a short time (2 hours).
Poly (arylene ether) copolymer (B) are suitable for both military and civilian use due to their excellent cost-effectiveness.
Poly (arylene ether) copolymer (B) are suitable for military use due to their highest performance and high price.
Poly (arylene ether) copolymer (A) can be applied within a temperature range of 300-350 degrees Celsius and can reach up to 450 degrees Celsius in a short period of time (8 hours).

Conductor diameter range: 0.10-10.02 mm (selected according to the wire gauge table)
Conductor materials: pure copper, silver plated copper, pure silver, and others
 

 

>

300 degrees Magnet Wire

300 °C Magnet Wire  
CITCABLE:   300 °C Magnet Wire  
   KEY PROPERTIES

Abrasion Resistance –  Poly (arylene ether) copolymer  imparts superior abrasion resistance to the wire it is covering. Both Poly (arylene ether) copolymer   insulated wire and PESK wire Poly (arylene ether) copolymer  can endure rugged environments allowing the covered wire to remain protected and to continue to function at a high level.

Chemical Resistance – Poly (arylene ether) copolymer  polymer is well-characterized for its broad chemical resistance spectrum protecting your wiring from corrosion and extending its work life.

Dielectric Strength – With its excellent dielectric strength, Poly (arylene ether) copolymer wire minimizes the motor’s susceptibility to outside electrical interference.>