Product Detail

Fluid Blocking Engine Transmission Wire CABLE

 Engines and Transmissions Fluid Blocked / Anti-Capillary wire cable
Fluid Blocking Engine/Transmission Wire is a high performance fluid blocking anti-cap wire built to handle  the high temperature fluid environments in engines and transmissions.extremely fluid resistant even at temperatures up to 200°C. It is an excellent, cost effective replacement for TFE, FEP or Tefzel insulated wire,but it survives temperatures to 270°C and higher for short periods of time. It is safer in overload conditions.that will last longer than ever before, meeting 3,000 hour heat age tests.  It has a life expectancy over 10,000 hours at 160°C and 20,000 hours at 150°C.CITCABLE is an anti-capillary automotive wire ideally suited in applications where heat protection,
 high temperature fluid resistance, fluid blocking, long life and less expensive wiring harness are required

Anti-wicking wire cable

CITCABLE:   Anti-wicking wire cable 
Products Description
·Rated temperature:-50℃ ~ 200℃
·Rated voltage: 600V DC
·Conductor: 0.1mm2 to 6.0mm2 fully annealed stranded copper  Per ASTM B-33
     Water blocking technology is an approach through which additional material (tape or a gel) is added to a cable’s construction to fill the interstitial areas. When used with suitable connectors and proper termination, water blocking can be effective in mitigating water and moisture.

Anti capillary Cable for LED

CITCABLE:  Anti-capillary wire Cable For LED
Products Description
·Rated temperature:-50℃ ~ 200℃
·Rated voltage: 600V DC
·Conductor: 0.35mm2 to 6.0mm2 fully annealed stranded copper  Per ASTM B-33
Operating temperature range
-60 °C to +200°C for Fluoroelastomer/ VITON/XLFE/FKM
-60 °C to +200°C for FEP
-60 °C to +200°C for XLETFE
-60 °C to +175°C for ETFE
-40 °C to +150°C for PVDF
-40 °C to +150°C for XLPE
-40 °C to +125°C for XLPE
-40 °C to +105°C for PVC

Fluid blocking cable

CITCABLE:   Fluid Blocked Cable
Products Description
·Rated temperature:-50℃ ~ 200℃
·Rated voltage: 600V DC
·Conductor: 0.05mm2 to 16.0mm2 fully annealed stranded copper  Per ASTM B-33
Operating temperature range
-60 °C to +200°C for Fluoroelastomer/ VITON/XLFE/FKM/THV/PPM
-60 °C to +200°C for FEP
-60 °C to +200°C for XLETFE
-60 °C to +175°C for ETFE
-60 °C to +105°C for PVDF-X
-40 °C to +150°C for PVDF
-40 °C to +150°C for XLPE>

Fluid Blocked wire cable

CITCABLE:   Fluid Blocked  wire cable
Products Description
·Rated temperature:-50℃ ~ 200℃
·Rated voltage: 600V DC
·Conductor: 0.35mm2 to 6.0mm2 fully annealed stranded copper  Per ASTM B-33
Operating temperature range
-60 °C to +200°C for Fluoroelastomer/ VITON/XLFE/FKM
-60 °C to +200°C for FEP
-60 °C to +200°C for XLETFE
-60 °C to +175°C for ETFE
-40 °C to +150°C for PVDF
-40 °C to +150°C for XLPE>

Anti-capillary Cable in Adblue tanks

CITCABLE: Anti-capillary wire Cable

Products Description
·Rated temperature:-50℃ ~ 200℃
·Rated voltage: 600V DC
·Conductor: 0.35mm2 to 6.0mm2 fully annealed stranded copper  Per ASTM B-33

Operating temperature range
-60 °C to +200°C for Fluoroelastomer/ VITON/XLFE/FKM
-60 °C to +200°C for FEP
-60 °C to +200°C for XLETFE
-60 °C to +175°C for ETFE
-40 °C to +150°C for PVDF
-40 °C to +150°C for XLPE
-40 °C to +125°C for XLPE
-40 °C to +105°C for PVC



 >

Water blocked wire Cable

CITCABLE:Water blocked wire Cable

Cable will be used outdoors
Cable will sit in standing water
Cable will be used in an underwater application
Cable will be constantly exposed to high-humidity or wet conditions
 

Gel filled water blocking

Gel water blocking involves the careful application of water-repelling gel to a cable’s shield to help stop the longitudinal migration of water. During the manufacturing process, the gel is carefully applied to fill-in gaps within the cables internal conductors. Once the final, outer jacket is applied, and having filled-in all internal gaps, the migration of water through the cable is less likely. CITCABLE recommends the use of gel water blocking technology as part of a comprehensive design including proper termination and selection of suitable connectors.

Motor Pump Winding Cable

  Motor Pump Winding Cable/High-Temperature Motor Lead Wire
Specifications Construction:
Conductor: Stranded tin-plated annealed copper, conforming to ASTM B-33
Insulation: Extruded VITON,PEI,XLFE,PEEK, silicone rubber with overall, non-fraying, fiberglass braid with a glossy high-temperature saturant finish.
  Wire Ratings:
Conductors with 4 AWG strands or larger are rated at 200°C and those with 6 AWG strands or smaller are rated at 150°C; 
6 AWG and 8 AWG rated 150°C   200°C 260°C ,300°C non-UL
Motor / Pump Winding Cable
CITCABLE has expertise in developing cables for special Motor Winding Cableand Pump Cable applications. 
Experienced in providing these for marine and industrial / OEM applications, we can provide winding wire to your specific 
requirements protected by the insulations best suited to your products’ operating environment.