CITCABLE: 16mm2 , 25mm2,35mm2,50mm2, 70mm2, 95mm2 ,120mm2 TEFLON Cable
fluoropolymer which displays similar properties to PTFE,PFA,FEP,XLETFE,ETFE,ECTFE,PVDF with outstanding resistance to chemicals, oils, lubricants, temperature extremes,
displays superior flexibility and improved dielectric strength.
Key Characteristics
Operating temperature: -100°C to 260°C
300V, 600V or 50KV Rating
Available with Alloy , Silver-Plated or Nickel-Plated Conductors,
Superior dielectric properties>
CITCABLE: FLAT Ribbon FEP CABLE 16AWG *5P
TEFLON offers outstanding resistance to chemicals, oils and lubricants, retains it’s flexibility at low temperatures and has good weatherability.
Key Characteristics » Operating temperature: -75°C to 200°C
250V to 10000V Rating
Available with Nickel ,Silver-Plated or Tin-Plated Conductor
Superior dielectrical properties
Nonflammable
Military Specification Styles A range of TEFLON Insulated wires, designed, manufactured and fully released to meet the requirements of MIL-W-16878 (NEMA HP4)>
Double Litz wire Cable
TRIPLE Teflon INSULATION WIRE
Three layer insulation Teflon wire
Double-insulated teflon wire
Teflon (2 Layer) Insulation Wire
magnetic wire with Double layer teflon wire
Litz ETFE Double Insulated 500*0.05mm magnetic wire
413*0.12mm(36AWG)/20KHz-50KHz
Teflon Litz 420*0.12 Multicore Magnetic wire 20KHz-50KHz for EV Charge
ETFE Class F 155°C
FEP Class H 180°C
PFA Class H 180°C
PEEK Class H 260°C
Litz Wire
Litz wire is a type of cable used in electronics to carry alternating current. The wire is designed to reduce the skin effect and proximity effect losses in conductors used at frequencies up to about 1 MHz. It consists of many thin wire strands, individually insulated and twisted or woven together, following one of several carefully prescribed patterns often involving several levels (groups of twisted wires are twisted together, etc.). This winding pattern equalizes the proportion of the overall length over which each strand is at the outside of the conductor.
Rupalit HF- litz wire
High copper fill factor
Triple insulated litz wire
Planar ribbon
Specifically for the cathodic protection industry, available with PVDF (Polyvinylidene Fluoride) or ECTFE (Ethylene Chlorotrifluoroethylene) primary insulations and a HMWPE (High Molecular Weight Polyethylene) outer jacket secondary insulation for assured performance in application.
>CITCABLE:High Temperature TEFLON Cable (PTFE,PFA,FEP,XLETFE,ETFE,ECTFE,PVDF)
fluoropolymer which displays similar properties to PTFE,PFA,FEP,XLETFE,ETFE,ECTFE,PVDF with outstanding resistance to chemicals, oils, lubricants, temperature extremes,
displays superior flexibility and improved dielectric strength.
Key Characteristics
Operating temperature: -100°C to 260°C
300V, 600V or 50KV Rating
Available with Alloy , Silver-Plated or Nickel-Plated Conductors,
Superior dielectric properties
Good flexibility
CITCABLE: High Temperature XLFEP TEFLON Cable
fluoropolymer which displays similar properties to PFA,XLFEP,XLETFE,ETFE,ECTFE,PVDF with outstanding resistance to chemicals, oils, lubricants, temperature extremes,
displays superior flexibility and improved dielectric strength.
Key Characteristics
Operating temperature: -100°C to 200°C
300V, 600V or 50KV Rating
Available with Alloy , Silver-Plated or Nickel-Plated Conductors,
Superior dielectric properties
High Temperature 25mm2 FEP CABLE>
fluoropolymer of tetrafluoroethylene, PTFE offers outstanding resistance to chemicals, oils, lubricants, temperature extremes and particularly suitable for use in severe environments.
Key Characteristics
Operating temperature: -100°C to 260°C
300V to 30KV Rating
Available with Silver-Plated or Nickel-Plated Conductors
Superior dielectric properties
Nonflammable
Can be supplied with an etched surface finish to improve adhesion with potting or encapsulation materials
Typical Applications
Military Communications and Avionics
Aerospace and Aircraft Wire Harnessing
Automotive Sensor Systems
OEM Appliance Wiring
CITCABLE: Single Pair Ethernet (SPE) CABLE
SPE High Speed Digital & Data Cable, Single Pair Ethernet (SPE), 100 Ω, 22 AWG,24 AWG, 26AWG Wire Size
Material Conductor— SPC, SPCA OR others
Materials Dielectrics — Foamed FEP/ OR ePTFE WRAP
Jacket —PUR,VITON, FEP,ETFE,PFA,PEI,PEEK
Characteristics:
Electrical power up to 1 GBit/s at 600MHz
Data transmission up to 40 meters (1 GBit/s) and up to 1000 m (10 MBit/s)
Trailing- and torsion resistant
Oil resistant
Designed for harsh industrial environments
PoDL (Power over Data Line) support
Available in various jacket materials: PUR,VITON, FEP,ETFE,PFA,PEI,PEEK>