CITCABLE: Radiation resistant PEEK TRIAXIAL COAX RADIATION CABLE
Product Construction:
PEEK insulated wires with Silver-plated or Nickel-plated conductors
Conductor: 32awg to 3/0awg,
PEEK insulated OD: 0.25—20.0mm
Key Features:
1, Working temperature:-75℃---- +260℃ ( 500°F)
2,300V, 600V rating or 60KV
3,Halogen free and low toxicity
4,Excellent radiation resistance
5,High Radiation Resistance 109 Rad= 107 Gy
6,PEEK cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion
PEEK TRIAXIAL COAX RADIATION CABLE
Key Properties
• High continuous operating temperature 500°F (260°C)
• Outstanding abrasion resistance
• Excellent dielectric strength
• Exceptional chemical resistance
• Protects against corrosion Technical Notes
• Can be spliced using PEEK Annealed, solid, round bare copper wire and others
Radiation resistant PEEK Power cable,peek wire cable manufacturer,peek wire cable ,PEEK Power cable,Radiation resistant PEEK Wire.
PEEK 75 OHM Coax Cable Radiation resistance
1. PEEK Jacket
2. Silver-Plated Copper Shields
3. PEEK Dielectric
4. Stranded Silver-Plated Copper Conductor 30AWG
PEEK Coax Cable has a high continuous operating temperature, excellent abrasion
and chemical resistance, and dielectric strength. Material properties are maintained in
long, continuous lengths without pinholes.
Environmental conditions:
a)Temperature Up to 316°C (600°F)
b)(Moisture 95% relative humidity Liquid Present
c) Radiation rate:
Normal: up to 1 Gy/h (100 R/h)
[up to 263 kGy (26 Mrads)]
LOCA* up to 5 Gy/h (500 R/h)
(d) Atmosphere traces of ozone slightly
Acidic
Conductor Material:
All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated
copper conforming to ASTM B298 or ASTM B355.
Shield/Briad
The shield material shall be either stainless steel, silver tin-coated or nickel-coated copper
Insulation Material Polyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket
insulation material shall be to MIL-P-46183.
